Interactive command to specify serial console connection settings for a network device. To configure the Lantronix system's management console port, use the config system serial command.
CLI resource: port, powercontrol, modem
Device makes: All
Modem: All
Power controllers: All
Lantronix Local Managers: All
LMS offerings: All
config serialThis command is available from terminal pass-through as ~s
The option to test the new settings is presented before the commit dialog.
The test option is not presented if called using ~s.
[admin@A505100087 (port1/1)]# config serial
Serial Bit Rate: 9,600
Serial Data Bit: 8
Serial Parity: none
Serial Stop Bit: 1
Serial Flow Control: none
DSR: false
CTS: false
RX : 0
TX : 0
Frame Errors: 0
Overrun Errors: 0
Parity Errors: 0
Breaks: 0
Change these? (y/n) [n]: y
--- Enter New Values ---
Serial Bit Rate [9600]: 19200
Serial Data Bit [8]:
Serial Parity [none]:
Serial Stop Bit [1]:
Serial Flow Control [none]:
Do you want to commit these changes? (y/n):--