Configures the Local Manager's network addressing.
A Local Manager is initially configured to use DHCP. You can use the show system ip command to display current management Ethernet network settings.
CLI resource: system
Lantronix system: All
LMS offerings: All
config system ip[admin@LantronixLM]# config system ip
--- Existing Values ---
Use DHCP: Yes
Management IP: 0.0.0.0
Host Name: LantronixLM
Subnet Mask: 255.255.255.0
Broadcast Address: 0.0.0.255
Default Route: 0.0.0.0
Speed/duplex: auto: 1000full
MAC Address: 00:0F:2C:00:CC:C6
Bonding Link: yes
Primary Ethernet Link: yes (bonded)
Auxiliary Ethernet Link: no (bonded)
Change these? (y/n) [n]: y
--- Enter New Values ---
Use DHCP: (y/n) [y]: n
Management IP: [0.0.0.0]: 198.51.100.4
Host Name: [LantronixLM]:
Subnet Mask: [255.255.255.0]:
Default Route: [0.0.0.0]: 198.51.100.254
speed/duplex: [auto:1000full]:
Use DNS (y/n) [y]:
Automatically configure DNS (y/n) [y]: n
DNS Server IP 1: 172.30.4.252
DNS Server IP 2:
Domain Search:
Warning: Remote connections may be lost if you commit changes.
Do you want to commit these changes? (y/n): yInventory > Local Manager page > Network > IP - specific to this system