When you disconnect a device from a port, its configuration information remains stored on the Lantronix Local Manager until it is explicitly cleared. The config system clear port command removes a previously configured device from the ports database.
Note: If you are deleting a virtual port or removing an option card/expansion unit, use the config system clear slot command to clear the hardware from the database before you clear the ports with this command.
CLI resource: system
Lantronix system: All
LMS offerings: All
config system clear port <slot/port>You can use the wildcard character * to clear all ports on the option card. This will clear all possible ports (n/1 through n/16) rather than detecting how the option card is populated.
[admin@LantronixLM]# config system clear port 2/3
Clearing port 2/3 will delete all associated data.
Continue? (y/n): y
port2/3 cleared[admin@LantronixLM]# config system clear port 1/*
Clearing port 1/* will delete all associated data.
Continue? (y/n): y
port1/1 cleared
port1/2 cleared
port1/3 cleared
port1/4 cleared
port1/5 cleared
port1/6 cleared
port1/7 cleared
port1/8 cleared
port1/9 cleared
port1/10 cleared
port1/11 cleared
port1/12 cleared
port1/13 cleared
port1/14 cleared
port1/15 cleared
port1/16 cleared3.4 - This command was introduced.
config system clear slot