This command is used to remove a previously configured virtual slot, expansion module or option card from the database. Port data is retained.
Use this command if you remove an option card from a Lantronix Local Manager.
When removing hardware, you must clear the slot from the database to prevent alarms.
Note: When you remove hardware permanently, use the config system clear port command also, to ensure that the port data is completely cleared from the database.
CLI resource: system
Lantronix system: All
LMS offerings: All
Lantronix 3200 Local Manager:
config system clear slot <1 | 2>
Lantronix 5000 Local Manager:
config system clear slot <2 | 3>
[admin@LantronixLM]# config system clear slot 2
Note: Embedded slots cannot be cleared
3.4 - This command was introduced
--