Displays the current SLV IPT Listener settings - if the Lantronix Local Manager is configured to answer SIP calls, this command displays what will be reported. To view IPT tests that have been configured, use the show slv ipt command.
A valid SLV license must be applied to access this command. Licenses are managed on the Lantronix Control Center.
CLI resource: system
Lantronix Local Managers: All
LMS offerings: Advanced
show system ipt
duration - the length of the recorded message in seconds endpoints - the number of calling numbers permitted. listen - true if IPT Listener is enabled, false if not payload - the test recording selected.
[admin@LantronixLM]# show system ipt
duration 30
endpoints 10
listen true
payload harvardfemale
Inventory > Local Manager page > Automation > IPT - specific to this system
3.4 - This command was introduced to replace show Local Manager ipt.