Lantronix welcomes Uplogix! Learn more here.

config system protocols telnet

Updated February 15, 2022. Written for LMS Version 6.2.

Configures the Lantronix Local Manager to respond to Telnet requests on TCP port 23.

Command availability

CLI resource: system

Lantronix system: All

LMS offerings: All

Syntax

config system protocols telnet <enable | disable>

Usage

This change requires a reboot of the system to take effect.

[admin@LantronixLM]# config system protocols telnet enable
Telnet will be enabled after the next Local Manager restart.

In the Lantronix web interface

Inventory > group page > Network > Protocols > Protocols - specific to this inventory group

Inventory > Local Manager page > Network > Protocols > Protocols - specific to this system

History

3.4 - This command was introduced.

Related commands

  • show system protocols

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved