Allows you to set a DHCP base address that the Lantronix Local Manager uses in assigning DHCP addresses to connected devices. Port devices may be configured to acquire DHCP addresses from the system as a part of the config init dialog.
CLI resource: system
Lantronix system: All
LMS offerings: All
config system protocols dhcp <base DHCP address>
The base DHCP address parameter is the base address to be used in generating DHCP addresses for connected devices. The default base address is 169.254.100.
[admin@LantronixLM]# config system protocols dhcp 169.254.100
Note: When setting the Local Manager to assign DHCP addresses to devices, the DHCP pool must not overlap with other pools or subnets. The base address must not overlap the system's management IP address or existing static assignments on ports.
Inventory > group page > Network > Protocols > DHCP Settings - specific to this inventory group
Inventory > Local Manager page > Network > Protocols > DHCP Settings - specific to this system
3.4 - This command was introduced.