Displays the Lantronix Local Manager's pulse settings. Pulse determines network connectivity by sending packets to an echo host. The system brings up the dial-up outband network if the pulse fails.
CLI resource: system
Lantronix system: All
LMS offerings: All
show system pulse
[admin@LantronixLM]# show system pulse
Use Pulse: false
Pulse Server IP 1: 172.16.200.103
Pulse Server Port 1: 7
Pulse Server IP 2: 127.0.0.1
Pulse Server Port 2: 7
Pulse Server IP 3: 127.0.0.1
Pulse Server Port 3: 7
Enable Out-of-Band on Pulse Failure: yes
Inventory > Local Manager > Out-of-Band > Pulse - specific to this system
3.4 - This command was introduced to replace show envoy pulse.