Modifying Device Configuration After Initial Setup

Updated March 9, 2021. Written for LMS Version 6.2.

The settings configured with the config init command can be updated at any time after you set up the port (refer to Initializing Ports) through the use of additional commands.

command description
config authentication Change authentication settings for the device, including Console/Enable usernames and passwords.
config device logging Configures logging settings for the port.
config info Configures description, make, model, OS, OS version, management IP address and dedicated Ethernet IP address.
config serial Configures serial settings.

Not finding what you're looking for?

The Uplogix Technical Support team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products. Give us a call at 888.663.6869 or email us at

About Uplogix

Uplogix is the most evolved out-of-band solution on the market. Our intelligent console server monitors network devices and takes actions directly over the console port, like an onsite technician plugging in a laptop.

Want to find out how Uplogix can help manage your network? Drop us a note!

Learn more:

Solutions Products Resource Center About Us Schedule a demo

© 2022 Uplogix, Inc., All Rights Reserved.

Contact Uplogix Support
+1 (888) 663-6869
+1 (512) 857-7070
Sales Assistance
General Inquiries