Local Manager console ports support a DCE pin-out. This includes both the management console port and the serial ports found on option cards.

To connect the Local Manager's serial ports to a managed device with a DTE pin-out, use a straight-through cable.

To connect the Local Manager's serial ports to a managed device with a DCE pin-out (including the console port of another LM), use a rolled cable.

Managed Devices

This sections provides cable pin-outs for connecting the Local Manager to some common devices.

DCE Adapter - RJ-45 to DB-9

This pin-out is typically used when connecting a Lantronix Local Manager to your computer's DB-9 serial port.

DCE Adapter - RJ-45 to DB-25

Rolled Cable

Use this for devices that required rolled cables.

F5 BigIP Load Balancer RJ-45 to DB-9

To connect the Local Manager to a BigIP, you'll need to use the standard RJ-45 to DB-9 pin-out.

IBM AIX Server RJ-45 to DB-9

To connect the Local Manager to an IBM AIX Server, you'll need to use the standard RJ-45 to DB-9 pin-out.

Memotec RJ-45 to RJ-11

Power Control Units

Server Technology

ServerTech PDUs usually required a straight-through cable.

BayTech RPC Series

APC RJ-45 to RJ-12 (7900 Series)

Modems

Iridium 9522B to DB-9

This is only required for standalone Iridium installations. LEO-I kits are connected with standard straight-through cables with RJ-45 headers.

Maximum Cable Lengths

Lantronix Local Managers meet all applicable specifications for external cable lengths.

• Ethernet: 330 ft (100 m)
• Serial RS-232: 50 ft (15 m)
• Serial RS-422 (LEO-I Kit): 500 ft (150 m)