Uplogix has been acquired by Lantronix! Learn more here.

Heads up!

The documentation library has moved to: level.lantronix.com/docs

This document is moving to: level.lantronix.com/docs/leo-kit-user-guide/physical-installation

Please update your bookmarks. This page will start automatically redirecting on July 1, 2023.


Introduction

Updated March 9, 2021. Written for LMS Version 6.2.

The following documentation describes the procedures for installing the Uplogix LEO-I remote satellite modem and GPS kit. This product is also known informally as an Uplogix Hawk. This information is applicable for all revisions of the Above Deck Unit PCB.

Target Audience

This guide is written for trained, qualified network support technicians responsible for installing the Uplogix Local Manager and equipment used with it.

Typographical Conventions

The following conventions are used in this guide.

LMS commands are highlighted in bold. For example: config system management

Sample text from the LMS CLI is presented in pre-formatted text.

For example:

[admin@u5000]# show who
admin        ssh     Sep 09 18:59   (172.30.4.226)

Keystrokes are enclosed in square brackets. For example: press [Enter].

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2023 Lantronix, Inc. All Rights Reserved