The following steps allow you to dial into Local Managers through an Iridium modem without the UCC GUI.
Open PuTTY to display the configuration window. Enter the IP address of the RUDICS server and select 'Telnet' as the connection type. The port number should be provided to you by Iridium.
Once you have successfully connected, you should be able to issue modem commands.
SSh to the UCC
login as: emsadmin emsadmin@UplogixUCC's password: Last login: Mon Jun 18 16:20:28 2018 from 126.96.36.199 [emsadmin@UplogixUCC ~]$
Telnet to the RUDICS router by issuing the command telnet [rudicsIP] [port]
[emsadmin@UplogixUCC ~]# telnet 172.30.123.98 2663 Entering character mode Escape character is '^]'.
Once you are connected to RUDICS, issue the commands ATZ, ats29=8, and ats57=9660, allowing the modem to return 'OK.'
ATZ OK ats29=8 OK ats57=9660 OK
The dial command is atdi and the phone number with no spaces.