You are here: Documentation Library > Command Reference > System Resource > show system pulse

show system pulse

Displays the Uplogix Local Manager’s pulse settings. Pulse determines network connectivity by sending packets to an echo host. The system brings up the dial-up outband network if the pulse fails.

Command availability

CLI resource: system

Uplogix system: All

LMS offerings: All

Syntax

show system pulse

Usage

[admin@UplogixLM]# show system pulse
Use Pulse: false
Pulse Server IP 1: 172.16.200.103
Pulse Server Port 1: 7
Pulse Server IP 2: 127.0.0.1
Pulse Server Port 2: 7
Pulse Server IP 3: 127.0.0.1
Pulse Server Port 3: 7
Enable Out-of-Band on Pulse Failure: yes

In the Uplogix web interface

Inventory > Local Manager > Out-of-Band > Pulse - specific to this system

History

3.4 - This command was introduced to replace show envoy pulse.

Related commands

  • config system pulse