You are here: Documentation Library > Command Reference > System Resource > show system ipt

show system ipt

Displays the current SLV IPT Listener settings - if the Uplogix Local Manager is configured to answer SIP calls, this command displays what will be reported. To view IPT tests that have been configured, use the show slv ipt command.

A valid SLV license must be applied to access this command. Licenses are managed on the Uplogix Control Center.

Command availability

CLI resource: system

Uplogix Local Managers: All

LMS offerings: Advanced


show system ipt


duration - the length of the recorded message in seconds endpoints - the number of calling numbers permitted. listen - true if IPT Listener is enabled, false if not payload - the test recording selected.

[admin@UplogixLM]# show system ipt
duration 30
endpoints 10
listen true
payload harvardfemale

In the Uplogix web interface

Inventory > Local Manager page > Automation > IPT - specific to this system


3.4 - This command was introduced to replace show Local Manager ipt.

Related commands

  • config system ipt