Displays configured SLV tests. To view test results, use the show slv stats command.
A valid SLV license must be applied to access this command. Licenses are managed on the Uplogix Control Center.
CLI resource: system
Uplogix Local Managers: All
LMS offerings: Advanced
show slv test <“testName” | *>
Specify the name of the test, or use * to display all tests.
[admin@UplogixLM]# show slv test * TCP tests: slv tcp NextHopRouter host 22.214.171.124 tcpPort 22 exit HTTP tests: No SLV HTTP tests were found for '*'. IPT tests: slv ipt xyzcoVoip call type sip codec g711u destination ip 192.168.1.104 duration 20 payload harvardmale exit
In the Uplogix web interface
Inventory > Local Manager page > SLV Stats - specific to this system
2.5 - This command was introduced.