You are here: Documentation Library > Command Reference > System Resource > show environment

Table of Contents
show environment

show environment

Displays the current and average temperature and (if applicable) humidity recorded by the Uplogix Local Manager.

Command availability

CLI resource: system

Uplogix system: 400, 3200

LMS offerings: All


show environment


The Uplogix 3200 Local Manager is available with an optional external 1-Wire™ temperature sensor. Older 4-port Uplogix Local Managers use an internal temperature sensor mounted at the air intake. The information returned by this command depends on which sensor (if any) is installed.

[admin@UplogixLM]# show environment
Current temperature: 84.83 degrees F
Current humidity:    25.81%
Average temperature over the last hour: 84.56 degrees F
Average humidity over the last hour:    25.33%
Power supply status: Power 2 inactive
Primary Ethernet status:   Link up
Secondary Ethernet status: Link down ; interface down
Tertiary Ethernet status:  Link down

In the Uplogix web interface

Inventory > Local Manager page > System > Environment - current environmental data for this system



Related commands

  • config environment