Execute an ICMP echo request from the Uplogix Local Manager to a specific IP address. From the port context, this command attempts to ping the dedicated device IP address. If the dedicated device IP address is not configured, it will attempt to ping the management IP address.
CLI resource: system, port
Device makes: 3Com, Alcatel, Cisco, Comtech EF Data, HP, iDirect, Juniper, ND Satcom, Netscreen, Nortel, Sun, Tasman, TippingPoint, native, server
Uplogix system: All
LMS offerings: All
ping <“ip address” | -m> ping <ipv6 address>
From the system context, specify an IP address to ping.
From the port context, specify -m to ping the management IP address if there is a dedicated Ethernet configured.
Only specific IP addresses (no broadcast) are supported.
Default routes are used (Management Ethernet or PPP/VPN if active).
[admin@UplogixLM]# ping 188.8.131.52 PING 184.108.40.206 (220.127.116.11) 56(84) bytes of data. 64 bytes from 18.104.22.168: icmp_seq=1 ttl=64 time=0.265 ms 64 bytes from 22.214.171.124: icmp_seq=2 ttl=64 time=0.228 ms 64 bytes from 126.96.36.199: icmp_seq=3 ttl=64 time=1.25 ms 64 bytes from 188.8.131.52: icmp_seq=4 ttl=64 time=0.216 ms --- 184.108.40.206 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2999ms rtt min/avg/max/mdev = 0.216/0.489/1.250/0.440 ms
2.1 - Command available from port menu.