Interactive command to configure the auxiliary Ethernet port. Configuration defaults to bonded (Layer2). Choices for the secondary Ethernet include bonded, capture and outband.
Bonded selection will fail over within milliseconds. Fail back will require 30 seconds.
If the selection is capture, the switchport should be configured as a port mirror directed to a specific VLAN or Ethernet port to be analyzed.
Outband will enable the interface when outband operations are proceeding, and bring the interface down when they are suspended.
CLI resource: system
Uplogix system: All
LMS offerings: All
config system secondary
[admin@UplogixLM]# config system secondary --- Existing Values --- Type: bonded Bonding Link: yes [E1] Primary Ethernet Link: yes (bonded active) [E2] Auxiliary Ethernet Link: no (bonded) [E3] Internal SFP Ethernet Link: no (bonded) Change these? (y/n) [n]: y --- Enter New Values --- Type [bonded]: capture speed/duplex [auto]: Warning: Remote connections may be lost if you commit changes. Do you want to commit these changes? (y/n): y
Inventory > group page > Network > Secondary Ethernet - specific to this inventory group
Inventory > Local Manager page > Network > Secondary Ethernet - specific to this system
4.2 - This command was introduced
4.3 - Capture option added