Configures the Local Manager’s network addressing.
A Local Manager is initially configured to use DHCP. You can use the show system ip command to display current management Ethernet network settings.
CLI resource: system
Uplogix system: All
LMS offerings: All
config system ip
[admin@UplogixLM]# config system ip --- Existing Values --- Use DHCP: Yes Management IP: 0.0.0.0 Host Name: UplogixLM Subnet Mask: 255.255.255.0 Broadcast Address: 0.0.0.255 Default Route: 0.0.0.0 Speed/duplex: auto: 1000full MAC Address: 00:0F:2C:00:CC:C6 Bonding Link: yes Primary Ethernet Link: yes (bonded) Auxiliary Ethernet Link: no (bonded) Change these? (y/n) [n]: y --- Enter New Values --- Use DHCP: (y/n) [y]: n Management IP: [0.0.0.0]: 198.51.100.4 Host Name: [UplogixLM]: Subnet Mask: [255.255.255.0]: Default Route: [0.0.0.0]: 198.51.100.254 speed/duplex: [auto:1000full]: Use DNS (y/n) [y]: Automatically configure DNS (y/n) [y]: n DNS Server IP 1: 172.30.4.252 DNS Server IP 2: Domain Search: Warning: Remote connections may be lost if you commit changes. Do you want to commit these changes? (y/n): y
Inventory > Local Manager page > Network > IP - specific to this system