You are here: Documentation Library > Command Reference > System Resource > config system fips

Table of Contents
config system fips

config system fips

Interactive command to set the Local Manager into FIPS mode. In FIPS mode the Local Manager can only be managed with a FIPS configured Control Center.

See the Uplogix FIPS 140-2 Security Policy Guide for additional reference.

Command availability

CLI resource: system

Uplogix system: All

LMS offerings: All

Syntax

config system fips enable

Usage

This change zeros all keys and regenerates ssh key pairs.

Note: THIS PROCESS IS NOT REVERSIBLE.

[admin@UplogixLM]# config system fips enable

** Issuing this command disables services and cryptographic algorithms to **
** comply with FIPS 140-2 rules and the Uplogix security policy.          **
**                                                                        **
** New SSH host keys will be generated.                                   **
**                                                                        **
** This system will not be able to talk to the management server,         **
** unless the management server is also running in FIPS mode.             **
**                                                                        **
** The system will reboot after changing its configuration.               **
**                                                                        **
** This process can only be undone with a factory reset which will result **
** in all data being lost.                                                **
**                                                                        **
** THIS PROCESS IS IRREVERSIBLE.                                          **

Proceed? (y/n) [n]:y
<output removed>

History

4.3 - This command was introduced.

Related commands

  • show system fips